We answer 24/7 — call anytime, even after hours, for your free quote (713) 360-0167

Epoxy Flooring in Spring, TX for Older Slabs and Newer Garages

Sealed garage, home and Old Town shop floors across the Spring area that wipe clean.

Prices Listed Up Front
Phone Answered Day & Night
Floor Studio Previews

Spring, TX: A Railroad Town Inside a Much Bigger Postal Area

Spring, TX is an unincorporated census-designated place in Harris County, within Houston’s extraterritorial jurisdiction. The original town sits where Spring-Cypress and Hardy roads meet, and the railroad brought its mills and cotton gins. Old Town Spring now holds more than 150 shops, restaurants and galleries, some in buildings over a century old.

The name is also used for parts of northern Harris and southern Montgomery counties, which Spring Creek divides. With homes from two building booms, one garage may need old sealer stripped while the next needs its first coat. We cover garages, slab-built rooms and patios, business floors and warehouse bays.

Much of Greater Houston sits on clay that swells after heavy rain and shrinks in dry stretches. Check typical prices in the Houston-area cost guide before you call, and compare finishes at Ascent Epoxy Houston.

Get a Free Quote
Two building booms47% of CDP homes are from the 1970s–80s, 26% from the 2000s.
Old Town storefrontsShop and restaurant floors there need finishes that clean up easily.
Clay across the regionHouston-area Lake Charles clay can crack the ground up to 2 inches wide when dry.
Plenty of rainAround 52 inches fall at Bush Intercontinental a year; a sealed floor rinses clean.
Flake epoxy garage floor example, Spring, TX

Flake garage finish shown as an example. Try flake or metallic on a Spring, TX garage with Floor Studio.

What You Can Check Before You Call

Reviews, prices and weather facts you can verify.

5.0

Google Rating, 15 Reviews

All five stars, including a warehouse owner in the Heights.

1970s

Slabs With Some Miles on Them

Older garages often need old sealer ground off and cracks repaired first.

2011

Median Home Year in ZIP 77389

Newer subdivisions mostly need grinding and a first coat.

90%

Humidity at 6 a.m.

Year-round average at Bush Intercontinental; damp mornings often delay the first coat.

$1,000–$2,700

Typical 1-Car Garage

Flake floor under polyaspartic, Greater Houston range; 2-car about $2,000–$4,500. A planning figure only.

See full pricing guide →

From First Call to First Drive-In

Stage by stage, whether the slab is five years old or fifty.

1

Describe Your Floor

Free

Use the form or phone (713) 360-0167: room, size, and any old coating or cracks. Floor Studio lets you try colors first. Get your free quote.

In-home consultation and slab moisture assessment
A floor assessment covers the concrete’s condition, finish choices and a moisture reading.
2

Test the Slab, Watch the Weather

Test

Moisture testing ($50–$300) shows whether a moisture-blocking primer is needed, roughly $1–$2 extra per sq ft. On coating day the slab must sit at least 5°F above the dew point.

Moisture meter reading on a bare concrete slab
Testing comes first: a moisture meter on the bare slab.
3

Strip, Grind and Repair

Grind

On older slabs, worn sealer comes off first; then diamond grinding roughens the concrete, and stable cracks get patched ($25–$250).

Crack and joint repair on a concrete slab
Cracks that have stopped moving get filled level with the slab.
4

Build the Coating

Layers

A base coat holds the chips, metallic pigment or single color; then a clear polyaspartic top coat adds resistance to sun, warm tires and stains.

Applying epoxy coating in controlled conditions
Old slab or new, the same three layers: primer, body coat, UV-resistant top coat.
5

Give It Time to Cure

Patience

Drive-on waits run from overnight to day five, by system; ask for yours on your free quote.

Completed epoxy floor — seamless and high-gloss
The finished floor: seamless, glossy and made for Southeast Texas summers.

Your Spring, TX Quote Costs Nothing.

Weigh the options; there’s no pressure to decide.

Get a Free Quote Call (713) 360-0167

Five Finish Systems for Spring Floors

Typical Houston-area prices for planning, not quotes. Old or new garage, only the prep changes.

Metallic epoxy floor, sample render

Metallic Epoxy

Pearl-like pigment drifting through glossy resin. Typically $6–$12 per sq ft.

Flake epoxy floor, sample render

Decorative Flake

Multicolor chips locked under polyaspartic, good at hiding dust. Typically $5–$9 per sq ft.

Solid-color epoxy floor, sample render

Solid Color

Light gray to tan, for workshops and back rooms. Typically $3–$6 per sq ft.

Quartz broadcast floor, sample render

Quartz Broadcast

Grippy quartz for restaurant kitchens and wash areas, from about $10 per sq ft in Houston.

Industrial epoxy floor, sample render

Industrial & Specialty

For washdown areas, urethane cement; a basic grind-and-seal is roughly $2.50–$4 per sq ft.

Built for a Southeast Texas Garage

Long summers, strong sun, damp mornings, daily use.

Hot-Tire Resistant

Bush Intercontinental logs roughly 111 days of 90°F-plus heat a year; a polyaspartic top coat helps a floor resist hot-tire marks.

Chemical & Stain Resistant

Oil drips and garden-chemical spills wipe off the coated surface if caught promptly.

UV-Stable

July sun shines about 70% of the possible hours; a UV-stable top coat holds its color longer than bare epoxy.

Impact & Abrasion Resistant

Workbenches, floor jacks and gym plates; well-ground concrete gives the grip.

Moisture-Aware Prep

Moisture reading first, especially on a slab that has had water on it.

Easy to Clean & Maintain

Dust-mop and rinse; there are no pores for oil to sink into.

Including a Heights Warehouse, Reviewed on Google

Quoted exactly as posted on our Google Business Profile.

5.0on Google · 15 Reviews
“… My industrial warehouse in the Heights neighborhood now has a stunning new epoxy floor that has completely transformed the space.”
Alexander Boreham
Google review
Warehouse
“I had been searching for a reliable epoxy flooring installation service for months, and I finally found the perfect team.”
Joana Norman
Google review
“The service is always on point and the products are superior quality. I highly recommend them to anyone in need of epoxy services.”
Annette Collado
Google review
Read All Reviews on Google (opens in a new tab)

Epoxy Flooring FAQs — Spring, TX

Answers for Spring-area homes and businesses.

Yes. We cover the Spring CDP and the wider Spring area, including ZIP 77386, which centers in Montgomery County, plus 77373, 77379, 77388 and 77389. Call (713) 360-0167 day or night; quotes are free.

Typical Greater Houston prices, not a quote: a 2-car garage in flake under a polyaspartic top coat usually costs around $2,000–$4,500, and a 3-car $3,000–$7,000. Older garages may add crack patching ($25–$250) or resurfacing at $3–$7 per sq ft. Our cost guide has the breakdown.

Usually. The old sealer has to be ground off so new resin can bond. The clay under Houston swells and shrinks, so every crack needs a movement check: stable cracks get filled, while a moving one will show back through any coating. No floor coating fixes a foundation.

A coating doesn’t make a garage waterproof, and it isn’t flood protection. A sealed floor does make water and mud easier to clean up. Given how much rain Greater Houston gets, a slab that has sat under water needs a moisture test before any coating.

Yes. Texas adopts the FDA Food Code, which calls for smooth, durable, easily cleanable floors, nonabsorbent where wet. In unincorporated Harris County, food permits come from Harris County Public Health. Typical Houston commercial systems run about $4–$12 per sq ft.

Ready to Price a Spring, TX Floor?

Phone us at any hour or leave the details in the form below; the quote is free.

Call (713) 360-0167

Short form. 5.0 on Google · 15 reviews (opens in a new tab).

Call Now Get a Free Quote
Floor Studio · New

See Spring garage colors in Floor Studio.

Pick a size, finish and color for a preview and typical local pricing.

Open Floor Studio →